WH-8A Wire Coiling Machine
A 5-axis, 2-point coiling machine with a maximum wire diameter of 0.8 mm and excellent cost-effectiveness.
The simple structure enables high-speed production and high accuracy in a reduced preparation time.
Taper synchronization constant
Enables the taper tilt to be managed with a value from 0 to 100.
Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
1-point coiling with a wire diameter of 0.08 to 0.3 mm
- Equipped with 8 standard axes: feed, cut, pitch, point, torsion, initial tension, coil front-back, and MSD-1.
- Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.
- Suitable for high-speed production of ballpoint pen springs, torsion springs, and elliptical springs in addition to standard cylindrical springs.
- Optional ultra-thin wire attachment can be used to coil springs with a diameter of 0.08 mm or less.
Parts for 2-point mechanism
- All fine-adjustment mechanisms have scale marks to improve reproducibility and ease of fine adjustment.
- Cut operations use a crank mechanism to achieve high-speed production.
- Coiling pin adjustment features an oscillating mechanism.
Dedicated MNO Program for Spring Production
- Easy operations for quicker preparation.
- High resolution for controlling the latest servo motors.
- Compatible with compression spring creation programs based on line graphs.
- Allows varied control based on measurement results, such as the pitch and diameter.
- Common program for both torsion machines and coiling machines.
- Includes a motor sensor system.
- Versatile production management screen and production data collection function.