CLS-10A Extension Spring Machine

CLS-10A-L-HR-res3.png

Standard extension machine. Double loop end is available. The machine enables high speed production. 

Your spring is transferred after forming. Shape forming and a production check are done in each stage.

To learn more about the CLS-10A, click the brochure below.

    • Enables high-speed production of extension springs with a beautiful hook shape.

      • A dedicated machine for extension springs with a wire diameter of 0.12 mm to 1.0 mm.
      • Produces a more beautiful hook shape than any other machine.
      • Enables a much higher speed of production than general torsion machines.
      • Programs for a wide variety of hooks are provided.

    • Beautiful hook shape

      • The CLS-10V can produce English hooks, German hooks, U hooks, side hooks, and Indian hooks.
      • Enables creation of extended hooks in which the two hooks are wound together neatly.
      • Enables processing without a straight line at the end of the cut.
      • Enables processing without an opening at the end of the cut.

    • High-speed production

      Maximum production speed of 120 items per minute – a much greater production volume than standard (quill type) torsion machines.

    • Optional Equipment

      • IS-1X shape detection unit with camera
      • 6-point simultaneous measurement with 2 cameras

  • Wire Diameter 0.12～1.0mm（.0047-.0394''） (See Note) Feed Axis Motor 600W　AC Servo Motor
    Outside Coil Diameter 1～12mm(.0394-.4724'') Cam Axis Motor 750W　AC Servo Motor
    Spring Length 3.0～100mm(.0984-3.937'') Power Supply AC200V, 20A, 3phase
    Direction of Helix Clockwise Solenoid Valves 4pcs
    Maximum Feed Length 9999mm(393.66'') Air Requirements 0.5MPa（5.1㎏f／c㎡）
    Production Speed 120ppm at max. Weight 440㎏(970lbs)
    〔Note〕 For wire diameter from 0.9 ～ 1.0mm, D/d must be greater than 6.




  •