CLS-10A Extension Spring Machine

Standard extension machine. Double loop end is available. The machine enables high speed production. 

Your spring is transferred after forming. Shape forming and a production check are done in each stage.
 
To learn more about the CLS-10A, click the brochure below.
Download Brochure
Image Item

Enable high-speed production of extension springs with a beautiful hook shape

  • A dedicated machine for extension springs with a wire diameter of 0.12 mm to 1.0 mm.
  • Produces a more beautiful hook shape than any other machine.
  • Enables a much higher speed of production than general torsion machines.
  • Programs for a wide variety of hooks are provided.

Beautiful hook shape

  • The CLS-10V can produce English hooks, German hooks, U hooks, side hooks, and Indian hooks.
  • Enables creation of extended hooks in which the two hooks are wound together neatly.
  • Enables processing without a straight line at the end of the cut.
  • Enables processing without an opening at the end of the cut.

Image Item

High-speed production

Maximum production speed of 120 items per minute – a much greater production volume than standard (quill type) torsion machines.

Optional Equipment

  • IS-1X shape detection unit with camera
  • 6-point simultaneous measurement with 2 cameras

Wire diameter ø0.2 ~ ø1.0 mm (ø0.0078" ~ ø 0.0393") Outside diameter ø1.5 ~ ø12 mm (ø0.0590" ~ ø 0.4724")
Index*1 D/d 4 or more Closed coil length*2 WD x 12, ~ 100 mm (~ 3.9370")
U hook length Max 15 mm (0.5905") Feed axis*3 0.001 mm (0.00004")
Feed speed Max 393.701 ft/min Point axis*3 0.001 mm (0.00004")
Torsion axis*3 0.001° Cam axis*3 0.001°
Transfer axis*3 0.001° Clamp axis*3 0.001°
Solenoid valve Max 8 pcs (Installed) Air pressure 0.3 ~ 0.5 MPa
Power source 3-phase, AC 200V, 15A Net weight 1322.77 lb
Control device Windows Software MPS
Display 15.6" Full HD touch screen External memory USB Thumb drive
Temperature 5 ~ 40°C (41 ~ 104°F)
*Program input unit, which does not represent accuracy.
*1: May vary depending upon wire diameter.
*2: Maximum is 5.905" when using the optional holder.
*3: Program input unit, which does not represent accuracy.
Specifications are subject to change without notice for product improvement.

"*" indicates required fields

Name*
Address*
Email*
What would you like to learn about?
Please let us know what's on your mind. Have a question for us? Ask away.